Crystal FALL LINE Airbag Vest – AXION Equestrian

Disponible du 3XS au XL, l’airbag AXION Equestrian s’adapte à toutes les morphologies.

Les tailles du 3XS au S conviennent également aux jeunes cavalières à partir d’environ 1m35.

Parce qu’un ajustement précis est essentiel à votre sécurité, AXION Equestrian vous propose un échange de taille.

Pour la France métropolitaine et la Corse, le retour et le renvoi sont offerts sur votre première demande d’échange, afin de vous garantir un ajustement parfaitement adapté, en toute sérénité.

Pour les autres destinations, AXION Equestrian étudiera chaque demande avec attention afin de vous proposer la solution la plus adaptée.

Parce qu’un équipement de sécurité doit être irréprochable, votre airbag AXION Equestrian bénéficie d’une garantie de 2 ans.

Cette garantie couvre tout défaut de fabrication ou de matériau, dans le cadre d’une utilisation normale.

En cas de besoin, notre service après-vente vous accompagne avec une prise en charge rapide et humaine, incluant la réparation ou le remplacement selon le diagnostic.

Pour plus d’informations, vous pouvez consulter notre Politique de Garantie & SAV

Les articles en stock sont expédiés sous 2 à 3 jours ouvrés.

En cas de rupture, la précommande vous permet de réserver votre pièce sur nos prochaines productions.

Chaque airbag AXION Equestrian intégrant une pose de cristaux réalisée à la main, le délai de fabrication et d’expédition est estimé entre 4 et 6 semaines.

Pour plus d’informations, veuillez consulter notre politique d’expédition.

Step 1 – Removing the used cartridge

After the airbag deploys, the ball is ejected, and the spring becomes visible.
Unscrew the used CO₂ cartridge, then remove it completely.

Step 2 – Loosening the system

Using the supplied Allen key (5 mm), loosen the cap.
Do not unscrew it completely, but only enough to reposition the piston.

Step 3 – Repositioning the piston

Reposition the piston using the Allen key or your finger.
Ensure that the piston's notch is perfectly aligned with the hole intended for the ball.

Step 4 – Replacing the ball

Replace the ball in its housing.
Make sure the ring around the ball is positioned flat.
Start screwing the cap back on by hand while firmly holding the ball.

Step 5 – Tightening the mechanism

Finish tightening the cap using the Allen key.
The cap must be in contact with the cylinder.
Do not overtighten to avoid damaging the system.

Step 6 – Installing the new cartridge

Screw in a new CO₂ cartridge suitable for your airbag size.
Tighten completely without forcing, ensuring the cartridge is correctly aligned.

Recommended cartridges

• 50 cc for sizes 3XS to XS

• 60 cc for sizes S to XL

Points of attention

• Always use a new cartridge after deployment

• Never reuse a cartridge that has already been pierced

• Never force when screwing

• In case of doubt about reassembly or the condition of the system, do not use the airbag and contact AXION Equestrian after-sales service

Recommendation

Correct rearming of the airbag is essential to guarantee its effectiveness in the event of a fall.

In case of doubt, it is recommended to have the product checked by AXION Equestrian after-sales service.

 

LAST UPDATED: MARCH 25, 2026

ARTICLE 1 – COMMISSIONING

Your AXION Equestrian airbag is delivered ready for use.

Before first use, it is essential to screw in a CO₂ cartridge suitable for the size of the vest.

The customer must ensure that the cartridge is correctly installed, not punctured, and perfectly screwed in before any use.

ARTICLE 2 – CHECKS BEFORE USE

Before each use, it is the customer's responsibility to:

• check that the cartridge is correctly screwed in and in good condition

• inspect the general condition of the vest (fabric, seams, trigger system)

• correctly install the tether strap at the level of the two stirrup leathers

• adjust the length of the tether strap

• verify the attachment of the connection cord

• wear the airbag closed and correctly adjusted

ARTICLE 3 – CONDITIONS OF USE

The airbag must be connected to the saddle before mounting a horse.

Use must comply with the following rules:

• use only the supplied tether strap

• never attach the cord to any point other than the one intended

• never use the airbag without a cartridge installed

• wear the airbag alone or under a compatible jacket

• maintain sufficient freedom of movement

Any non-compliant use is the sole responsibility of the customer.

ARTICLE 4 – AIRBAG SYSTEM OPERATION

The AXION Equestrian airbag operates using a mechanical trigger system connected to the saddle by a tether cord.

In the event of a fall, the tension exerted on the cord triggers the system, allowing the airbag to inflate in a few milliseconds.

Inflation helps absorb shocks and stabilize certain areas of the body.

The system is designed to limit accidental deployments, but accidental deployment remains possible, especially if disconnection is forgotten.

ARTICLE 5 – AFTER DEPLOYMENT

After deployment:

• the cartridge must be replaced with a new, suitable cartridge

• the general condition of the vest must be checked

• any deployed cartridge must be replaced immediately

It is strictly forbidden to reuse a cartridge that has already been deployed.

ARTICLE 6 – GAS CARTRIDGES

Compatible cartridges are:

• 50 cc for sizes 3XS to XS

• 60 cc for sizes S to XL

Only cartridges meeting these specifications must be used.

It is forbidden to:

• refill a cartridge

• use a used cartridge

• use a non-compliant cartridge

Cartridges must be stored in a dry place, away from heat and shocks.

ARTICLE 7 – MAINTENANCE

To preserve product performance:

• do not machine wash

• do not tumble dry

• do not immerse

• clean with a soft, slightly damp cloth

• do not use aggressive detergents

• do not iron

• do not dry clean

Light brushing may be performed if necessary.

ARTICLE 8 – DRYING

• air dry

• prefer drying on a hanger

• do not use a heat source

• avoid prolonged exposure to heat or sun

ARTICLE 9 – STORAGE

The product must be:

• stored in a dry and ventilated place

• hung or stored flat

• protected from humidity and heat

• protected from any compression, twisting, or folding

It must not be stored:

• in a place subject to temperature variations

• outdoors

• in a vehicle exposed to the sun

• near heat sources

• near animals or objects that could damage it

ARTICLE 10 – BEST PRACTICES

The customer must:

• regularly check the proper functioning of the system

• replace any damaged parts

• never modify the mechanical system

• do not use the product if in doubt

• contact customer service if necessary

The airbag must be used only in the context of equestrian practice.

ARTICLE 11 – PROTECTION LIMITS

The AXION Equestrian airbag is personal protective equipment designed to reduce the risk of injury.

It does not guarantee in any case:

• absence of injury

• absence of shock

• prevention of all risky situations

Protection is only effective at the time of inflation and only on the covered areas.

ARTICLE 12 – DEPLOYMENT LIMITS

The airbag system does not deploy in certain situations, including:

• if the rider remains in the saddle during the fall

• in the absence of sufficient tension on the cord

• in case of incorrect installation

• in case of non-compliant use

ARTICLE 13 – INTERFERENCE WITH THE PRODUCT

Wearing external elements can alter the proper functioning of the airbag.

These particularly include:

• backpacks

• unsuitable clothing

• rigid or pointed objects

These elements can slow down or prevent inflation.

ARTICLE 14 – HORSE REACTIONS

The deployment of the airbag can produce a noise likely to startle the horse.

The customer acknowledges this risk and assumes responsibility for it.

ARTICLE 15 – UNSUITABLE USE

The use of the airbag may not be suitable in certain situations.

It is recommended to seek medical advice in case of:

• specific pathology

• medical device

• pregnancy

ARTICLE 16 – WARRANTY

Your AXION Equestrian airbag benefits from a 2-year warranty from the date of purchase.

It covers any manufacturing or material defect under normal use.

ARTICLE 17 – WARRANTY EXCLUSIONS

The warranty does not cover:

• normal wear and tear

• improper storage

• unsuitable washing

• heat exposure

• damage related to non-compliant use

• external deteriorations

• any modification of the product

• any intervention by a third party

Any damage resulting from misuse is excluded from the warranty.

ARTICLE 18 – AFTER-SALES SERVICE (SAV)

For any service request, the customer must first contact AXION Equestrian customer service.

The return of the product is mandatory for any after-sales service claim.

Return shipping costs are the responsibility of the customer.

No service can be provided without prior return of the product for inspection.

In case of a proven defect, repair or replacement may be offered. In such cases, incurred costs may be reimbursed or covered.

Processing time depends on:

• the nature of the problem

• the period

• the availability of parts

ARTICLE 19 – WARRANTY LIMITS

No warranty can be applied if usage and maintenance instructions are not followed.

ARTICLE 20 – GUIDE ACCESS

This guide is available at any time on the AXION Equestrian website.

It is not provided in hard copy.

Color

Black

Design & Manufacturing

• Technical fabric developed and produced in Italy
• Assembly and mounting carried out in France (Haute-Savoie)
• Crystals hand-placed in France, near the Bassin d'Arcachon

Composition

• Main fabric: Nylon and spandex
• Lining: 3D warp knit spandex mesh
• Breathable zones (sides and mid-back): 82% nylon – 18% elastane
• Collar: 39% polyamide – 38% polyester – 14% elastane – 9% polyurethane
• Zipper: Nylon
• Slider (zip head): Metal
• Connection strap: Nylon and metal

Technicality

• Fitted cut and stretch fabric for a precise adjustment
• Breathable mesh zones for optimal ventilation
• Zipper closure system with waterproof protection
• Water-repellent, stretch, and deformation-resistant fabric after deployment
• Discreetly integrated CO₂ gas cartridge
• Elastic side panels for optimal freedom of movement
• High-resistance reinforced seams

Triggering System

• Mechanical release by tearing
• Automatic activation in case of a fall
• Inflation time: approximately 100 milliseconds

Protection Zones

• Cervical spine
• Neck
• Spine
• Back and lower back
• Sacrum and pelvis
• Thorax

Gas Cartridges

• System compatible with standard market CO₂ cartridges
• 50 cc for sizes 3XS to XS
• 60 cc for sizes S to XL
• Cartridge replaceable after deployment

Compatibility

• Compatible with most riding jackets adapted for airbag use
• Recommended with jackets containing at least 15% elastane for optimal function

Standards & Certifications

• CE certified
• Compliant with standards NF S72-800:2022 and EN 13158

Weight

• Approximately 600 g (size S)

Product Content

• 1 connector cord
• 1 tether strap
• 1 Allen key
• 1 cartridge replacement kit

Warranty

• Manufacturer's warranty: 2 years